This is a short list of our most frequently asked questions. For more information about any of our products, please contact us.
What clamps do I need to do a standard top?
What is the SR18SB used for?
What is the SR2X model used for?
Do the suction cups work on all solid surfaces?
How do you get the edges lined up?
Will the clamps work on granite?
Will the clamps work on quartz (engineered stone)?
Will the clamps work on laminate?
What is the best thing to clean the clamp bottoms and top surface?
Can we use the clamps to carry items?
The clamp is releasing before the adhesive has cured. What is the problem?
What clamps do I need to do a standard top?
To do a standard 558.8 mm or 635 mm top we recommend using (2) SR4X models and it is a good idea to also have an SR18SB.
What is the SR18SB used for?
It is used for extra adjustment to the seam between the two SR4X models.
What is the SR2X model used for?
The SR2X is used for pieces between 127 mm and 279.4 mm wide that are too small for the SR4X. It is also good to go between (2) SR4X when you can not fit a third SR4X. On a 762 mm bar for example.
Do the suction cups work on all solid surfaces?
Yes, but some solid surface (such as Wilsonart) are rough sanded from the factory and may need to be sanded smoother so the suction cups can get a good seal.
How do you get the edges lined up?
If the edges don’t stay even, you can use a standard spring clamp to hold them in place until the adhesive dries.
Will the clamps work on granite?
Not good, granite is usually too porous and the cups will not keep a good seal.
Will the clamps work on quartz (engineered stone)?
The clamps were designed for solid surface, but they can work on quartz. Due to the extreme weight of the quartz, it is not easy to pull and level the seam.
Will the clamps work on laminate?
Yes, they will work good as long as the finish is not too rough that the suction cups can’t get a good seal. The clamp hold time may vary depending in laminate finish.
What is the best thing to clean the clamp bottoms and top surface?
Clean water or any mild cleaner that will not cause damage to the suction cups or create a residue or build up on them. We have been told (but not tested) that the 3M Citrus Cleaner is great for cleaning all types of surfaces. It is for cleaning and maintaining the rubber pads on seam clamps.
Can we use the clamps to carry items?
No, the clamps are not designed for carrying items and by doing so you risk severe damage to the clamps, materials and injuring yourself or someone close! Plus it will void all warranty claims on the clamps.
The clamp is releasing before the adhesive has cured. What is the problem?
It can be a few things causing this. Make sure the countertop surface and suction cup bottoms are very clean and undamaged. The countertop surface also needs to be very smooth. Some solid surface (such as Wilsonart) are rough sanded from the factory and may need to be sanded smoother so the suction cups can get a good seal. Rough and dirty surfaces can cause suction cups to release early. Make sure to press down firmly when engaging the suction cups. We have been told (but not tested) that the 3M Citrus Cleaner will increase the holding strength of the cups.